Slab Leak Detection ProsHome › Locations › Flower Mound
Flower Mound, Denton CountySlab Leak Detection Flower Mound: Exact Spot, Written Report
When you search for slab leak detection Flower Mound can count on, you want an exact answer. Flower Mound slab leak detection from licensed plumbers gives you one. A slab leak is a broken pipe beneath your home's concrete foundation, and in Flower Mound it can run for months unnoticed. Non-invasive detection by a licensed plumber locates it precisely, so you know exactly where it is before anyone touches your floor.
- Acoustic listening
- Thermal imaging
- Tracer gas
- Pressure & hydrostatic tests
- Camera inspection
Flower Mound slab leak detection starts with these signs
- Water bill jumped with no change in use
- Meter keeps moving with everything off
- Warm spot on tile, wood or carpet
- Running-water sound when nothing is on
- Water heater runs constantly
- Damp carpet, cupped wood, musty smell
- Sewer smell or slow drains
- New cracks or sticking doors
My carpet is damp near a wall in my Flower Mound home. Is it a slab leak?
It can be. Water from a leaking line under the slab often wicks up at the edges of a room or near a plumbing wall. Rule out a leaking toilet, tub or water heater nearby first, then test the lines under the floor.
Check for a slab leak in Flower Mound before you call
This simple test tells you whether water is escaping somewhere in your Flower Mound home before you pay for a visit.
- Turn everything off. Faucets, dishwasher, washer, ice maker, sprinklers and pool fill.
- Find your meter. It is usually in a box near the street. Read the number or take a photo.
- Wait one to two hours. Use no water at all during that time.
- Read it again. If the number moved, or the small leak indicator is spinning, water is escaping.
- Narrow it down. Close the house shut-off. If the meter keeps moving, the leak is in the yard line; if it stops, it is inside, possibly under the slab.
What our Flower Mound slab leak detection covers
We do one thing: find leaks under concrete slabs. Every visit is done by an independent, licensed Texas plumber who specializes in leak detection, so you pay to find the leak, not to break concrete searching for it.
Water Line Leaks
Find leaks in the pressurized supply lines buried in or under your slab.
Hot-Water Line Leaks
Thermal imaging traces warm spots and leaking hot-water runs.
Drain Line Leaks
Hydrostatic and isolation tests find drain leaks that never show on your meter.
Pressure Testing
Confirm a leak exists and measure how fast the line loses pressure.
Line Isolation & Tracing
Separate hot, cold and branch lines and map where they really run.
Acoustic Pinpointing
Ground microphones hear escaping water through the concrete.
Tracer Gas Detection
For very quiet leaks and plastic pipe, gas rises at the leak point.
Written Leak Report
Exact location, readings and photos for your insurer or water utility.
What makes slab leak detection in Flower Mound different
Tarrant and Denton County clays expand when wet and shrink in summer, and the slab moves with them. Pipes cast into the slab or buried beneath it flex, rub and eventually crack.
Flower Mound's large homes often have long hot-water runs under the slab, and long runs give a leak more places to start.
Serving homes across Flower Mound, including neighborhoods near Grapevine Lake, Lakeside DFW, Flower Mound Town Hall.
Why do Mid-Cities homes in Flower Mound get more drain problems as they age?
Homes built in the 1960s–80s often have cast-iron drains that rust and crack under the slab, and the clays of Denton County keep the slab moving. Drain leaks don't show on your water meter, so a hydrostatic test is the way to check them.
Pipes, home ages and slab leak detection in Flower Mound
Across Flower Mound: 1960s–80s brick ranches with cast-iron drains, plus larger 1980s–2000s homes with copper supply lines. Knowing what pipe is under your floor tells the plumber which slab leak detection method will work best.
Copper supply lines
Common in homes built from the 1960s through the early 2000s. Copper wears where it rubs against concrete or gravel, and pinhole leaks show up as homes pass 25–40 years old. Acoustic listening finds them well.
Cast-iron drains
Standard in homes built before about 1980. Cast iron rusts from the inside and cracks as the slab moves. Drain leaks never show on the water meter, so a hydrostatic test and camera inspection are used.
Polybutylene
Gray plastic pipe installed from about 1978 to 1995. It is known for failing at fittings. Tracer gas and pressure testing are often the best ways to locate leaks in it.
PEX and newer plastic
Used in most homes built since the 2000s, often run from a manifold. PEX leaks are usually at fittings or where the pipe was nicked during construction. Each run can be pressure-tested from the manifold.
Our slab leak detection process in Flower Mound
The same nine steps on every job, so you know what’s happening and why. Read the full process →
Listen and look first
The plumber hears what you've noticed and walks the home to look for clues.
Rule out the easy causes
Toilets, faucets, irrigation, the water heater and the AC drain are checked so you don't pay to search for the wrong leak.
Confirm the leak with the meter and a pressure test
A meter test and a pressure test prove water is escaping from the plumbing.
Isolate the leaking line
Hot, cold and branch lines are separated so the search focuses on the one that's leaking.
Test the drains, if needed
Drain leaks don't show on the meter, so they get their own hydrostatic test and camera check.
Trace the pipe's route
An electronic locator maps where the leaking line actually runs under the floor.
Pinpoint the exact spot
Acoustic listening, thermal imaging and tracer gas find where the water is escaping, and two methods must agree.
Scan the slab and mark the leak
The slab is checked for steel tendons and rebar, and the leak is marked on the floor.
Get your written report
You receive the leak's location, the line, the readings and photos in writing.
Water coming up through the floor in Flower Mound?
Shut off the main water valve and call now. We’ll connect you with a licensed slab leak specialist.
What a slab leak detection visit in Flower Mound looks like
When you book slab leak detection in Flower Mound, a licensed plumber who knows Denton County homes comes to you with the tools to read through concrete: pressure gauges, acoustic ground microphones, thermal imaging and tracer gas.
Most of the visit is about narrowing the search. A meter test confirms water is escaping, a pressure test measures how fast, and isolating the hot, cold and branch lines turns the whole house into a single pipe to follow.
With the leaking line identified, its route is traced across the floor and the plumber listens through the slab in a grid. On hot-water lines, a thermal camera shows the warm patch spreading from the leak. The exact spot is marked only when two methods agree.
Before the plumber leaves, you get a written report with the leaking line, the exact location, the readings and photos. Keep it for your insurer, your water utility’s leak credit and whichever licensed plumber you choose for the repair.
We arrange slab leak detection for homes all over Flower Mound, from neighborhoods near Grapevine Lake to those around Flower Mound Town Hall. Most visits take two to four hours.
Slab leak detection in Flower Mound, done the careful way
Most of the cost of a slab leak comes from searching for it and repairing the floor afterward. Slab leak detection is all we do, so you get an exact location before anyone touches your floor.
Licensed Texas plumbers
All work is done by independent plumbers licensed in Texas who will show their license number on request.
Typical prices up front
Know the usual range before anyone arrives, and get a written quote before work starts.
Documentation you can use
Photos, readings and a written summary for your insurer or your water utility’s leak credit.
Why Flower Mound homeowners call a slab leak detection specialist
Many general plumbers do excellent work. The difference is focus and equipment when the leak is hidden under concrete.
| What matters | Slab leak detection specialist (our network) | Typical general plumbing contractor |
|---|---|---|
| Main focus | Only finding hidden leaks under slabs | Installs, repairs and remodels across all plumbing |
| Detection tools | Acoustic ground mics, thermal imaging, tracer gas, line tracing | Varies; often a pressure test and visual inspection |
| Locating the leak | Pinpointed before any concrete is opened | May open the floor in more than one place to search |
| Drain leaks under slab | Hydrostatic, isolation test and camera find the broken section | May recommend replacing the whole drain system |
| After the leak is found | Exact spot marked and documented; you choose who fixes it | Often moves straight into its own repair or repipe |
| Paperwork | Written report with photos for insurance and water credits | Usually an invoice only |
| Typical cost to locate | $150–$600 in most Flower Mound homes | Varies; exploratory openings add cost |
Tip: whoever you call, ask which detection methods they use and whether they’ll pinpoint the leak before opening the slab.
What slab leak detection costs in Flower Mound
Published national and Texas ranges. You get the price before the visit.
Slab Leak Detection
- Meter & pressure testing
- Hot/cold line isolation
- Acoustic & thermal pinpointing
- Leak marked on the floor
- Written report with photos
What raises the price
- Larger homes with more lines
- More than one leak
- Very quiet leaks needing tracer gas
- Drain testing (a hydrostatic test is typically about $250)
- After-hours visits
What it doesn’t include
- Breaking or patching concrete
- Pipe repair or rerouting
- Foundation work
- Mold cleanup
We only do detection. You get the exact location and choose who does any repair.
Sources: This Old House, Angi/HomeAdvisor via Bob Vila.
Will I still pay for detection if no leak is found?
Usually yes, because detection is a diagnostic service. If no slab leak is found, you still learn where the water isn't going, which rules out costly guesses. Ask about the fee before the visit.
Same day, this week, or keep watching? A Flower Mound guide
Call the same day
- Water coming up through the floor
- Sewer smell inside the home
- Meter spinning fast with everything off
- A large warm or wet area
Shut off the main water valve first.
Book this week
- Meter moves slowly with everything off
- One warm spot on the floor
- Water heater running constantly
- Bill up for a second month
Keep watching
- A single high bill with an explanation
- Hairline cracks with a normal meter test
- Slow drains in one fixture only
Repeat the meter test monthly.
Insurance and slab leaks in Texas
Coverage depends on your policy and the cause. The Texas Department of Insurance has long said the standard HO-B policy covers damage to the dwelling, including the foundation, from an accidental discharge of water from a plumbing system. Many policies still exclude wear and tear, the pipe itself, and mold.
What helps your claim: shut off the water, protect your belongings, and get the leak documented by a licensed plumber before the adjuster visits.
Ask for a leak credit
Many Texas cities and MUDs credit part of the water lost to a hidden leak once it’s repaired. Most want a paid plumber’s invoice and a request within a set number of days, and allow one credit a year.
Keep your invoice, and call your utility soon after the repair to ask about its rules and deadline.
Questions about slab leaks in Flower Mound?
Still not sure if you have a slab leak? Call and describe what you’re seeing. A licensed plumber will tell you whether it’s worth a visit.
Call (000) 000-0000Why do large Flower Mound homes seem to get hot-water slab leaks?
Big homes often have long hot-water runs under the slab. Hot lines expand and contract every day, and that movement can wear a pinhole where pipe touches concrete or gravel. A warm spot on the floor is the classic sign.
Can clay soil in Denton County crack the pipes under my slab?
Yes. Denton County clays swell after rain and shrink in drought, and the slab moves with them. Pipes in or under the slab flex and rub until a joint fails or a pinhole forms.
Do older homes in Flower Mound have cast-iron pipes under the slab?
Many homes built in Flower Mound before about 1980 have cast-iron drains under the slab, and some are now 50 years old. Cast iron rusts and cracks over time. A hydrostatic test shows whether your drains hold water.
Why is my Flower Mound water bill so high when I can't see a leak?
A leak under the slab runs all the time, out of sight. Turn off every fixture and watch the meter for one to two hours. If it moves, water is escaping, and a plumber can find where.
Why is there a warm spot on my floor?
A warm spot on tile, wood or carpet is a classic sign of a leaking hot-water line under the slab. Thermal imaging can confirm it and trace the line. Turn off the water heater's cold inlet and call a plumber.
How long does slab leak detection take in Flower Mound?
Most leaks are located in two to four hours. Complex homes, multiple leaks or drain problems can take longer. You'll get the results, the exact location and a written report before anything is opened.
Last updated 2026-10-23