Licensed Texas plumbersNon-invasive slab leak detection Call: (833) 841-0340[email protected]
004127 LEAK INDICATOR SPINNING every fixture is off

Home › Locations › Burleson

Burleson, Johnson and Tarrant Counties

Slab Leak Detection Burleson: Pinpointed Before Concrete Is Cut

Slab leak detection Burleson homeowners rely on works in old and new parts of town alike. Burleson slab leak detection pinpoints leaks in older homes near Old Town Burleson and in the many newer subdivisions along I-35W, before anyone opens a floor.

$150–$600Typical detection cost
2–4 hrsTypical time to locate
9 stepsBefore anyone touches your floor
How leaks are found:
  • Acoustic listening
  • Thermal imaging
  • Tracer gas
  • Pressure & hydrostatic tests
  • Camera inspection
Warning signs

Does your Burleson home need slab leak detection?

  • Water bill jumped with no change in use
  • Meter keeps moving with everything off
  • Warm spot on tile, wood or carpet
  • Running-water sound when nothing is on
  • Water heater runs constantly
  • Damp carpet, cupped wood, musty smell
  • Sewer smell or slow drains
  • New cracks or sticking doors
Try the 2-hour meter test. Turn off every faucet and appliance, write down the meter reading, use no water for one to two hours, then read it again. If it moved, water is going somewhere, and it’s time to call.

Our Burleson laundry room floor is damp, but the washer looks fine. Could it be a slab leak?

It could. Laundry rooms often sit near hot and cold lines under the slab. Check the washer hoses and water heater, then do a meter test with everything off.

Our process

Our slab leak detection process in Burleson

The same nine steps on every job, so you know what’s happening and why. Read the full process →

  1. Listen and look first

    The plumber hears what you've noticed and walks the home to look for clues.

  2. Rule out the easy causes

    Toilets, faucets, irrigation, the water heater and the AC drain are checked so you don't pay to search for the wrong leak.

  3. Confirm the leak with the meter and a pressure test

    A meter test and a pressure test prove water is escaping from the plumbing.

  4. Isolate the leaking line

    Hot, cold and branch lines are separated so the search focuses on the one that's leaking.

  5. Test the drains, if needed

    Drain leaks don't show on the meter, so they get their own hydrostatic test and camera check.

  6. Trace the pipe's route

    An electronic locator maps where the leaking line actually runs under the floor.

  7. Pinpoint the exact spot

    Acoustic listening, thermal imaging and tracer gas find where the water is escaping, and two methods must agree.

  8. Scan the slab and mark the leak

    The slab is checked for steel tendons and rebar, and the leak is marked on the floor.

  9. Get your written report

    You receive the leak's location, the line, the readings and photos in writing.

What to expect

Your Burleson slab leak detection visit, start to finish

Burleson slab leak detection follows the same careful path on every job, but the details depend on your home. A licensed plumber who serves Johnson and Tarrant Counties arrives with pressure gauges, an acoustic ground microphone, a thermal camera and, when needed, tracer gas equipment.

Most of the visit is about narrowing the search. A meter test confirms water is escaping, a pressure test measures how fast, and isolating the hot, cold and branch lines turns the whole house into a single pipe to follow.

Next, the line is traced and the slab is scanned. Acoustic listening finds the point where escaping water is loudest, thermal imaging confirms hot-water leaks, and tracer gas handles the quietest leaks. Two readings must agree before the spot is marked.

Before the plumber leaves, you get a written report with the leaking line, the exact location, the readings and photos. Keep it for your insurer, your water utility’s leak credit and whichever licensed plumber you choose for the repair.

If you found us by searching leak detection slab Burleson, TX, this is the visit you can expect: careful testing first, and no concrete broken to search.

We arrange slab leak detection for homes all over Burleson, from neighborhoods near Old Town Burleson to those around Interstate 35W. Most visits take two to four hours.

Local conditions

Local conditions behind Burleson slab leaks

Burleson sits on clay that shifts with wet and dry seasons, with sandier ground in places to the west. Slabs on clay move enough over the years to stress the pipes inside them.

Older homes near Old Town Burleson can have aging supply lines and drains, while the newer subdivisions along I-35W mostly have PEX and leak at fittings when they leak at all.

Serving homes across Burleson, including neighborhoods near Old Town Burleson, Interstate 35W.

Do Old Town Burleson homes have older plumbing than newer subdivisions?

Yes. Older in-town homes can have original drains and supply lines, while newer subdivisions mostly have PEX. Both can leak, for different reasons.

GroundClay to the east, giving way to sandy and limestone soils to the west.
HomesNew exurban subdivisions, older town centers and many rural homes.
WaterCity systems, special utility districts and private wells.
WeatherHot summers, dry spells and occasional ice storms.
Detection cost

Slab leak detection prices for Burleson homes

What most homeowners pay, and what moves the number up.

Most homes
$150–$600

Most Burleson homes near Old Town Burleson land inside this range.

Call for Today’s Price

Your visit includes

  • Hot and cold line isolation
  • Acoustic listening through the slab
  • Readings you can give your insurer
  • Written report with photos
  • Electronic line tracing

What can raise it

  • Two water heaters or a recirculation loop
  • Lines buried under thick tile or stone
  • After-hours or weekend visits
  • A very quiet leak that needs tracer gas

Not included: foundation work, breaking or patching concrete, flooring replacement.

Sources: This Old House, Angi/HomeAdvisor via Bob Vila. We only do detection; you choose who does any repair.

Can a slab leak in Burleson get into our ductwork?

In homes with ducts in the slab, water can collect in them and cause musty air and mold. If air from floor vents smells damp, have the plumbing and ducts checked.

How urgent is it?

How soon does your Burleson home need slab leak detection?

Call the same day

  • Water coming up through the floor
  • Sewer smell inside the home
  • Meter spinning fast with everything off
  • A large warm or wet area

Shut off the main water valve first.

Book this week

  • Meter moves slowly with everything off
  • One warm spot on the floor
  • Water heater running constantly
  • Bill up for a second month

Keep watching

  • A single high bill with an explanation
  • Hairline cracks with a normal meter test
  • Slow drains in one fixture only

Repeat the meter test monthly.

Slab leak detection only

Slab Leak Detection Burleson: What We Cover

We do one thing: find leaks under concrete slabs. Every visit is done by an independent, licensed Texas plumber who specializes in leak detection, so you pay to find the leak, not to break concrete searching for it.

Water Line Leaks

Find leaks in the pressurized supply lines buried in or under your slab.

Hot-Water Line Leaks

Thermal imaging traces warm spots and leaking hot-water runs.

Drain Line Leaks

Hydrostatic and isolation tests find drain leaks that never show on your meter.

Pressure Testing

Confirm a leak exists and measure how fast the line loses pressure.

Line Isolation & Tracing

Separate hot, cold and branch lines and map where they really run.

Acoustic Pinpointing

Ground microphones hear escaping water through the concrete.

Tracer Gas Detection

For very quiet leaks and plastic pipe, gas rises at the leak point.

Written Leak Report

Exact location, readings and photos for your insurer or water utility.

Comparison

Slab leak detection specialist vs. general plumbing contractor in Burleson

Many general plumbers do excellent work. The difference is focus and equipment when the leak is hidden under concrete.

What mattersSlab leak detection specialist (our network)Typical general plumbing contractor
Main focusOnly finding hidden leaks under slabsInstalls, repairs and remodels across all plumbing
Detection toolsAcoustic ground mics, thermal imaging, tracer gas, line tracingVaries; often a pressure test and visual inspection
Locating the leakPinpointed before any concrete is openedMay open the floor in more than one place to search
Drain leaks under slabHydrostatic, isolation test and camera find the broken sectionMay recommend replacing the whole drain system
After the leak is foundExact spot marked and documented; you choose who fixes itOften moves straight into its own repair or repipe
PaperworkWritten report with photos for insurance and water creditsUsually an invoice only
Typical cost to locate$150–$600 in most Burleson homesVaries; exploratory openings add cost

Tip: whoever you call, ask which detection methods they use and whether they’ll pinpoint the leak before opening the slab.

Homes & pipes

What is under the slab in Burleson homes

Across Burleson: New exurban subdivisions, older town centers and many rural homes. Knowing what pipe is under your floor tells the plumber which slab leak detection method will work best.

Copper supply lines

Common in homes built from the 1960s through the early 2000s. Copper wears where it rubs against concrete or gravel, and pinhole leaks show up as homes pass 25–40 years old. Acoustic listening finds them well.

Cast-iron drains

Standard in homes built before about 1980. Cast iron rusts from the inside and cracks as the slab moves. Drain leaks never show on the water meter, so a hydrostatic test and camera inspection are used.

Polybutylene

Gray plastic pipe installed from about 1978 to 1995. It is known for failing at fittings. Tracer gas and pressure testing are often the best ways to locate leaks in it.

PEX and newer plastic

Used in most homes built since the 2000s, often run from a manifold. PEX leaks are usually at fittings or where the pipe was nicked during construction. Each run can be pressure-tested from the manifold.

Why choose us

Why Burleson homeowners choose detection first

Most of the cost of a slab leak comes from searching for it and repairing the floor afterward. Slab leak detection is all we do, so you get an exact location before anyone touches your floor.

Licensed Texas plumbers

All work is done by independent plumbers licensed in Texas who will show their license number on request.

Typical prices up front

Know the usual range before anyone arrives, and get a written quote before work starts.

Documentation you can use

Photos, readings and a written summary for your insurer or your water utility’s leak credit.

Water coming up through the floor in Burleson?

Shut off the main water valve and call now. We’ll connect you with a licensed slab leak specialist.

Call (833) 841-0340
Check it yourself

A 2-hour leak test for Burleson homes

This simple test tells you whether water is escaping somewhere in your Burleson home before you pay for a visit.

  1. Turn everything off. Faucets, dishwasher, washer, ice maker, sprinklers and pool fill.
  2. Find your meter. It is usually in a box near the street. Read the number or take a photo.
  3. Wait one to two hours. Use no water at all during that time.
  4. Read it again. If the number moved, or the small leak indicator is spinning, water is escaping.
  5. Narrow it down. Close the house shut-off. If the meter keeps moving, the leak is in the yard line; if it stops, it is inside, possibly under the slab.
FAQs

Questions about slab leaks in Burleson?

Still not sure if you have a slab leak? Call and describe what you’re seeing. A licensed plumber will tell you whether it’s worth a visit.

Call (833) 841-0340
Can clay soil in Burleson break a pipe under the slab?

Yes. Clay that swells and shrinks moves the slab, and pipes inside it flex until a joint or worn spot fails.

Our Burleson water bill is high but only in summer. Is that a slab leak?

Summer bills usually rise from irrigation. Compare winter bills year to year instead; a leak shows up as higher usage even when sprinklers are off.

Can a slab leak in Burleson cause our sprinklers to seem broken?

Not directly, but a leak can drop household water pressure, and a low-pressure sprinkler zone can look broken. Test the house lines if both problems appear together.

Do Burleson homes on larger lots have long yard lines?

Many do. Close the house shut-off and watch the meter: if it still moves, the leak is in the yard line, not under the slab.

Our Burleson home has hardwood in the living room. Can a leak be found there without lifting boards?

Yes. Acoustic and pressure tests work through the floor, and the leak is marked from the surface. Knowing the exact spot also lets you weigh a reroute that avoids the hardwood.

Does Burleson's mix of old and new homes change which test is used first?

Yes. Older homes often start with drain checks if there are drain symptoms, while newer homes start with meter and pressure tests on the supply lines.

Insurance

Insurance and slab leaks in Texas

Coverage depends on your policy and the cause. The Texas Department of Insurance has long said the standard HO-B policy covers damage to the dwelling, including the foundation, from an accidental discharge of water from a plumbing system. Many policies still exclude wear and tear, the pipe itself, and mold.

What helps your claim: shut off the water, protect your belongings, and get the leak documented by a licensed plumber before the adjuster visits.

Water bill

Ask for a leak credit

Many Texas cities and MUDs credit part of the water lost to a hidden leak once it’s repaired. Most want a paid plumber’s invoice and a request within a set number of days, and allow one credit a year.

Keep your invoice, and call your utility soon after the repair to ask about its rules and deadline.

Service area

Slab leak detection near Burleson and across Texas

Last updated 2026-11-03

Call (833) 841-0340